Please note: The lenses on this page will fit the Pro 520, 550 Pro Zoom, 550 HQ1 and HQ2 cameras only

The Pro cameras are fitted with high quality treated 3.6mm lenses which will give you 78° angle of view. This is the widest you can go without having a noticeable fish-eye effect which looks wrong in most videos. Fitting a larger lens will have the effect of zooming in on your subject. These precision lenses are manufactured by Canon.

You've bought a high quality bullet camera and you're going to want to protect your investment. The outer lenses on our bullet cams are replaceable should it suffer any damage out in the field.

Reduce the risk of scratching your outer lens by using a protective lens cap when the camera is not in use. For cameras between 21 and 23mm in diameter.

Lens caps are now supplied with all cameras

A flexible cap for your LANC remote control. Gives greater protection against the elements. Lanc can be fully operated with this cap in place.

With a good set of 8 rechargeable batteries, our cameras can run for over 10 hours on a good charge. This is the new version of the battery holder which has the cables directly soldered to the terminals. So you can't accidentally knock them off any more! Batteries not included.

This is what you need if you want to extend the A/V cable and mic cable for your camera.. Female to Female sockets.

Used for extending the power output from any low-voltage source.

An ideal way to mount this recorder to a car dash or bike. Contains 4 x high quality, high bond sticky backed velcro.

Perfect for being able to remove your recorder quickly when leaving your vehicle.

Use this cable for splitting the output from the cig. lighter adapter, the 12v hard wired reg or the battery pack above. NOTE: Do not use to split the power output from the PDR100

For powering up to five seperate items. Useful for a multi-camera setup. 1 x DC input and 5 x DC outputs.

Spare battery for Mini DVR 1


Add a further 2 hours record time with this 900mah battery for the mini dvr1.

This battery is charged fully in about 2.5 hours using the external fast battery charger included with the mini dvr1 package.

3.7v li-ion battery cell.

Use this spare pad with your vholdr mounting kit so you can stick it to different helmets. Uses high bond 3M stickyness.

Much like the double hook and loop mount but with a 90° twist.
This is a great mount for handlebars, glider struts and any other bar under 1 1-2" in circumferance. This works well for mounting the camera to a seat post for a rear facing shot.

For vented cycle helmets

A fantastically well engineered mount from Viosport. Ideal for mounting a camera to just about any vented helmet. Perfect for mtb's this strong velcro mount will ensure you don't part with your camera.

A simple but effective way of securing our bullet cameras to your car, bike or helmet.
Great for stealthy mounting positions such as in a grille or on a mudguard.
Very strong and does help to damp out some vibration from the bullet camera.

A simple but effective device to hold your camera secure. Velcro mount with sticky backing. Will hold any helmet camera from 19mm to 25mm in diameter. Not compatible with H2o camera. For skiing and mountain boarding use this with the Goggle mount below if you can't mount directly to your helmet.